Heavy duty single layer polyethylene pipes

In Ara Tube Water Company, heavy polyethylene pipes for use in:

• Drinking water networks
• Drainage networks
• Rural urban water supply networks
• Pressure irrigation networks, including drip and rainwater
• Coverage of telecommunication cables and optical fiber
• Industrial liquids and sewage system
• System for highly abrasive liquids
• And other similar cases

In sizes of 16 to 630 mm, according to the national standards INSO14427, ISO4427 and EN12201, in all permitted compression classes, and with high quality internal and external raw materials, PE80 and PE100 are produced.

Sepahan Water Pipe Company is proud to be one of the few companies that has the ability to provide a wide range of requests on different pipe sizes as soon as possible and with excellent quality and is known as one of the largest in Iran and is approved.

The characteristics of heavy polyethylene pipes made by Sepahan Water Pipe Company, considering the use of the best raw materials and production technology, are:

• Impact resistance
• Resistance to internal and external pressures within the allowable range INSO14427
• Resistance to cold and heat under ISO4427 standard conditions
• Resistance to chemicals under the conditions specified in ISO10358
• Resistance to corrosion and decay under INOS14427 standard conditions
• Resistance to destructive solar radiation (UV)
• Intrinsic resistance to vibrations caused by earthquakes
• No sedimentation due to the polished inner surface of the pipe
• Excellent flexibility
• Quick installation and execution due to the possibility of using various connection methods and elastic properties in this type of pipe
• Ease of transportation due to low weight and the ability to loop pipes up to 110 mm
• 50 years useful life according to standard conditions
• Can be used on uneven terrain due to its flexibility
• Ability to thermally engrave the specifications in order to maintain its durability throughout the life of the pipe

Lightweight polyethylene pipes

Ab Lu Luleh Ara Co. makes its lightweight polyethylene pipes for use in drip irrigation systems under isiri 7607 standard and international standard ISO 4427, EN 12201 using its best raw materials PE40 paint with external diameters of 16-12, 20 , 25 and 32 in all authorized pressure categories according to national and international standards.

Heavy polyethylene pipes (used in urban and rural gas transmission system)

In Sepahan Water Pipe Company, heavy polyethylene pipes with yellow strips are produced and supplied under EN1555 standards, ISIRI 11233 standards and the standard of National Iranian Gas Company IGS for use in gas transmission system.

This pipe, which is produced with SDR11 and SDR13.6, is produced from the best licensed raw materials introduced by the National Iranian Gas Company and is offered to the Iranian gas transmission market under a license issued by that esteemed company.

Fabricated connections

Sepahan Water Pipe Company, according to the need for various types of connections in polyethylene pipes, especially in sizes higher than 125 and in pressure categories higher than 10 atmospheres, has launched a production line of fabricated connections and its products up to size 400 in the form of elbows. It offers several pieces, three-way and four-way under 14427 standard.

Sepahan Water Pipe Company, in addition to equipping its production lines with the latest design achievements in spiral cylinder design, has completed these lines with the latest control facilities:

Intelligent weight control system (gravimetric)

Basically, the output of extruders is subject to fluctuations for various reasons, including raw materials, environmental conditions, power fluctuations, operator errors, etc. As a result, the thickness of the pipe will change.

Therefore, in Sepahan Ara Tube Water Company, an intelligent weight control system has been used to create stability in the unit weight of the meter and the same thickness throughout the length of the produced pipes.

Therefore, with this system, customers can be sure that at the moment of production, an automatic controller monitors the weight and thickness of the pipe and protects the quality of the pipe.

Tube thickness measurement system from non-destructive method and on ultrasonic line

Quality in Sepahan Water Pipe Company is a principle. Therefore, in order to control it moment by moment, in addition to the usual control and inspection equipment, an advanced system of ultrasonic thickness measurement method is used on-line.

In this system, at any moment, it is observed by sound waves, thickness, diameter, dipole and changes in the thickness of the pipe. If it approaches the edges of the permissible range, it returns it to the defined level by the relevant alarms.

Pipe diameter control system

Adjustable calibrators made by the German company CCA in the lines of Ara Sepahan Water Pipe Company and have the ability to precisely adjust the diameter in the permissible ranges, to always produce permissible diameters in the pressure range from 2.5 to 25 bar and in connecting pipes from any The conventional method has the best response and creates complete satisfaction for the operators, supervisors and the installation team.

The definition of quality control in Sepahan Water Pipe Company is different from what has been heard. In this company, the quality control process, all effective parameters, from the time of purchasing raw materials, warehousing of raw materials, approval of raw materials, supervision of production, initial and in-process inspections, final inspection and approval tests, product warehousing, loading and Supervises transportation and customer response at the beginning of purchase and after installation.

Experienced manpower with the necessary experience and expertise in the polymer industry from the country’s prestigious universities and the cooperation of experienced consultants in this industry, the quality control unit of Ara Sepahan Water Pipe Company has become one of the best quality control systems and pipe laboratories in the country. .

After manpower, which is our main asset, we are proud to have one of the best equipped and best laboratories for pipes and fittings in the country, which has been achieved under the supervision of NACI to the Board of Partners of the National Standard Organization of Iran (Accreditation Laboratory).

Laboratory equipment in Sepahan Ara Water Pipe Company has been collected in such a way that it currently has the following tests on its pipes and fittings on its agenda:

• Perform all PVT, AT, BRT, TT tests on raw materials and polyethylene pipes under the national standard INSO14427 and ISO4427
• Perform all the above tests on lightweight polyethylene pipes under ISIRI 7607 and ISO 4427 standards
• Perform all the above tests on gas pipes made of polyethylene under the national standard ISIRI 11233, EN 1555 and IGS
• Performing the above tests on threaded joints under INSO14427, ISO 14236, ISO4427
• Performing the above tests on electrofusion and fabrication joints according to INSO 14427, ISO4427, EN 12201
• Testing on rubber o-rings used in threaded joints under national and international standards

The management of Sepahan Water Pipe Company, in line with its organizational growth and excellence, has always strived for lasting quality. For this reason, it has collected complete unique equipment and used it by polymer specialists.

In this company, the life of the pipe is now approved by a combination of OIT and hydrostatic tests.

It should be noted that currently Sepahan Water Pipe Company has 5 hydrostatic test lines with the highest required accuracy (manufactured by IPT Germany)

And 12 Iranian hydrostatic and burst test lines, which are performing BRT and TT tests 24 hours a day under 100, 165 and 1000 hour tests.

Set of 5 ton traction machine and CNC sample preparation in Sepahan Water Pipe Company, which are able to perform this test on pipe samples up to 630 mm in size and record and report the results. It is one of the unique features of this company.

Finally, Sepahan Water Pipe Company is able to perform the following tests on internal and external samples (as a standard laboratory) as soon as possible and provide its report to its customer.

• Dimensions (thickness, diameter, bifurcation, thickness changes)
• Density
• Melt flow index
• Percent of soot and filler
• Soot distribution
• Thermal return
• Hydrostatic (lifetime) 100, 165 and 1000 hours in hot and cold water
• How to burst (60-second test) BURST
• Pipe crushing (gas related) Squeeze of
• Thermal resistance Oit
• Determination of type and composition of DSC polymer
• Slow growth crack (raw material test) SCG
• Rapid crack growth (raw material test) RCP
• Increase the length at the point of Tensile rupture
• Preparation of sample for CNC tensile test
• Resistance to physical and chemical conditions (environmental) 1 hour and 1000 hours ESCR
• Jell Contect gel percentage
• PULL OUT
• Penetration into the pipe (fitting test) binding
• Leakage in bending (connection test)
• Dimensions (for O-ring)
• Appearance (for O-ring)
• Maneuver of pressure (for O-ring)
• Hardness (for O-ring) Shore A

Sepahan Water Pipe Company, considering the opinion of prominent consultants in the field of marketing, sales and customer satisfaction, has designed a customer satisfaction system based on the ISO 10002 standard so that it can monitor its outputs and always take effective steps to ensure this satisfaction.

Speed ​​of action, interaction with the customer, receiving the customer’s word and responsiveness and finally customer satisfaction are the priorities of this section.

Currently, Sepahan Ara pipe water with various organizations, institutions and customers, including….

• National Iranian Gas Company throughout the country
• ABFA companies
• Municipalities
• Agricultural Jihad and respected farmers
• Industrial Estates
• Merchants and traders in the pipe and fittings industry
• End consumers
• Exporters

Cooperates and offers its products.

We boldly claim that in Sepahan Water Pipe Company, the personnel are among the main assets and are working in a growth and development environment as a large family.

The training unit of Sepahan Water Pipe Company conducts a process in which all personnel are constantly trained during the year so that their sensitivity to the impact of their performance on the product continuously leads to the desired quality stability and customer satisfaction.

The beating heart of Sepahan pipe water is part of its applied studies. In this company, by providing appropriate software and hardware infrastructure and with the efforts of its experts, effective measures have been taken in training, optimization and development of control systems.

Creating a very strong electronic library of the polymer industry, especially polymer pipes, reviewing new production systems and its development, including: entering the field of production of electrofusion fittings, eliminating defects in production by forming quality loops, analyzing tests and holding Training courses and practical seminars for consumers of this type of products and similar cases are among the actions of this unit.

It is also the duty of this unit to find the root of any potential and actual non-compliance and to eliminate its root causes.

Sepahan Water Pipe Company is one of the reputable companies in which, according to foreign auditors, the implementation of quality management systems has been done in a real and practical way.

The dynamism, growth and assurance of the correct operation of various processes and consequently the success of uninterrupted production along with a lasting name in the industry of pipes and polymer fittings are all due to the collective efforts of Ab Luleh Company and performing process operations based on ISO 900: 2008 standard.

And for our customers:

• High speed and power in production and service
• Timely delivery of goods
• Production based on national and international standards
• …

Brought

Sepahan Water Pipe Company, relying on God Almighty and being present in the production field during the last two decades, has shown that the comfort of our esteemed customers is of great importance for this company.

Therefore, it proudly announces:

• The quality of all products of this company is guaranteed under national and international standards.
• By accurately implementing the schedule in production and also creating appropriate infrastructure in the supply of raw materials, timely delivery of goods is one of its requirements and will accept the delivery of goods as soon as possible.
• According to customers, it provides reports on tests performed.
• This allows the customer to visit the production, control and inspection stages of their products whenever they want.
• Always supervise the transportation and loading so that the health guarantee of the transported goods is obtained with the lowest costs and the highest satisfaction in transportation by the customer.
• Provides technical information and training workshops on the selection of raw materials to the installation process and related tests for technical officials in organizations, institutions and other customers as part of its services and in order to “do the right thing” from it Will benefit.